GENERAL MACHINE DATA

It’s an industrial, automatic, suction "Collating System" with modular structure, based on a rotary system that guarantees high speed production and a minimum wear to moving parts.

The frame hardiness and the advanced tecnology make the MAXIMA a reliable instrument and suitable specially for high productions.

The suction feeders, equipped with indipendent telescopic suckers, which are adjustable in height and tilt, leave the sheets on the collecting tables.

The sheets are carried forward on support bars moving around the machine.

The frontal blowers and the separating springs assure a perfect pickup.

An electro-pneumatic control, situated in every station, stops the machine in case of a double or missing sheet.

In every station it’s possible to load up to 40 cm of material.

A motorized independently system adjust the pile height of each station in a gradual and automatic way.

TECHNICAL DATA

From 3 up to 21 stations, can be elongated in units of two stations.

Speed: Maximum 5.000 mechanical cycles/hour
The actual production speed and the actual net output are dependent on size, paper quality, thickness, condition of stock and other operating conditions.

SHEET SIZE:

Standard version: Max. 350 x 500 mm (gripper edge); Min. 80 x 100 mm (gripper edge)

Two up version: Max. 350 x 235 mm (gripper edge); Min. 80 x 100 mm (gripper edge)

Two up (complete loading tables separation): Max 350 x 220 mm (gripper edge); Min. 80 x 100 mm (gripper edge)

At the delivery of the two up collator, for coupling the two parallel collecting, is settled an overlapping unit, equipped with a set or sheet feeding station.

This unit is also useful as a automatic line switcher and conveyor.

Merging device at the delivery of the collator, positioned 90° across the collating direction; it merges together the two parallel sets. This device can also be used for manual or automatic feeding of single sheets or precollated part sets, as well as a transfer to downstream machines (delivery to the left side in running direction as option). Transport of the material by mean of pushers and continuos side jogging square.

Electromagnetic gates stop and jogger the sets on 4 sides before feeding the delivery exit (connection with other machines). Max. size mm 350 x 500, min. mm 100 x 150.

Extra charge for merging device to the left, instead of the right.

Double belts’ introduction for MERGING DEVICE to be fitted on it’s back for a straight in-line use together with the MAXIMA. Useful for feeding by hand a precollated part set.

Paper weight: from 20 up to 900 g/m2, paper, board and plastic material, also perforated and die cut. For different sheet sizes in width and height up to 5 mm set thickness in the same set.

Digital readout of speed.

6 digits continuous counter.

Infrared safety curtains on both sides (CE and TUV certified).

A control panel for the most important machine functions in each two stations unit, on the side opposite to the preloads.

Pressure/vacuum pump(s).

Batch counter at the delivery exit of the collator to stop the machine at the desired number of cycles. In this way it is easier the separation of different jobs inside the same load of paper.

Electronic programming for max. 4 stations, to be determined in advance, which enables automatic feeding e.g. of a separating sheet and/or a top and/or bottom sheet (as cardboard) (optionals).

2 extra add-on stations for field retrofit. The extra stations can be added up to a maximum of 21.

Horizontal variable speed delivery exit with double belts, for keeping a well register of the material, especially with special papers.

Back to Top

GENERAL MACHINE DATA

It’s an industrial, automatic, suction "Collating System" with modular structure, based on a rotary system that guarantees high speed production and a minimum wear to moving parts.
The frame hardiness and the advanced tecnology make the MAXIMA a reliable instrument and suitable specially for high productions.

The suction feeders, equipped with indipendent telescopic suckers, which are adjustable in height and tilt, leave the sheets on the collecting tables.

The sheets are carried forward on support bars moving around the machine.
The frontal blowers and the separating springs assure a perfect pickup.

An electro-pneumatic control, situated in every station, stops the machine in case of a double or missing sheet.

In every station it’s possible to load up to 50 cm of material.

A motorized independently system adjust the pile height of each station in a gradual and automatic way.

TECHNICAL DATA

From 3 up to 17 stations, can be elongated in units of two stations.

Standard version: Max. 505 x 710 mm (gripper edge); Min. 120 x 100 mm (gripper edge)

Two up version: Max. 500 x 335 mm (gripper edge); Min. 120 x 100 mm (gripper edge)

At the delivery of the two up collator, for coupling the two parallel collecting, is settled an overlapping unit, equipped with a set or sheet feeding station.

This unit is also useful as a automatic line switcher and conveyor.

Merging device at the delivery of the collator, positioned 90° across the collating direction; it merges together the two parallel sets. This device can also be used for manual or automatic feeding of single sheets or precollated part sets, as well as a transfer to downstream machines (delivery to the left side in running direction as option). Transport of the material by mean of pushers and continuous side jogging square.

Electromagnetic gates stop and jogger the sets on 4 sides before feeding the delivery exit (connection with other machines). Max. size mm 350 x 500, min. mm 100 x 150.

Extra charge for merging device to the left, instead of the right.

Double belts’ introduction for MERGING DEVICE to be fitted on it’s back for a straight in-line use together with the MAXIMA. Useful for feeding by hand a precollated part set.

Paper weight: from 20 up to 900 g/m2, paper, board and plastic material, also perforated and die cut. For different sheet sizes in width and height up to 5 mm set thickness in the same set.

Digital readout of speed.

6 digits continuous counter.

Infrared safety curtains on both sides (CE and TUV certified).

A control panel for the most important machine functions in each two stations unit, on the side opposite to the preloads.

Pressure/vacuum pump(s).

Batch counter at the delivery exit of the collator to stop the machine at the desired number of cycles. In this way it is easier the separation of different jobs inside the same load of paper.

Electronic programming for max. 4 stations, to be determined in advance, which enables automatic feeding e.g. of a separating sheet and/or a top and/or bottom sheet (as cardboard) (optional).

2 extra add-on stations for field retrofit. The extra stations can be added up to a maximum of 17.

SPECIAL PRELOADING

Each station is equipped, underneath the preloading tables, with a return rail.

This device makes the table taking easier and makes the following loading operations faster.

Back to Top

GENERAL MACHINE DATA

The last birth in the OBSCURE company to reduce the space! It’s an industrial, automatic, suction "Collating System" with modular structure, based on a rotary system that guarantees high speed production and a minimum wear to moving parts.

The frame hardiness and the advanced tecnology make the Maxima a reliable instrument and suitable specially for high productions.

The suction feeders, equipped with indipendent telescopic suckers, which are adjustable in height and tilt, leave the sheets on the collecting tables.

The sheets are carried forward on support bars moving around the machine.

The frontal blowers and the separating springs assure a perfect pickup.

An electro-pneumatic control, situated in every station, stops the machine in case of a double or missing sheet.

In every station it’s possible to load up to 50 cm of material.

A motorized independently system adjust the pile height of each station in a gradual and automatic way.

TECHNICAL DATA

From 3 up to 17 stations, can be elongated in units of two stations.

Speed: Maximum 4.000 mechanical cycles/hour
The actual production speed and the actual net output are dependent on size, paper quality, thickness, condition of stock and other operating conditions.

Standard version: Max. 505 x 800 mm (gripper edge); Min. 120 x 100 mm (gripper edge)

Two up (complete loading tables separation): Max 500 x 380 mm (gripper edge); Min. 150 x 100 mm (gripper edge)

At the delivery of the two up collator, for coupling the two parallel collecting, is settled an overlapping unit, equipped with a set or sheet feeding station.

This unit is also useful as a automatic line switcher and conveyor.

Merging device at the delivery of the collator, positioned 90° across the collating direction; it merges together the two parallel sets. This device can also be used for manual or automatic feeding of single sheets or precollated part sets, as well as a transfer to downstream machines (delivery to the left side in running direction as option). Transport of the material by mean of pushers and continuous side jogging square.

Electromagnetic gates stop and jogger the sets on 4 sides before feeding the delivery exit (connection with other machines). Max. size mm 350 x 500, min. mm 100 x 150.

Extra charge for merging device to the left, instead of the right.

Double belts’ introduction for MERGING DEVICE to be fitted on it’s back for a straight in-line use together with the MAXIMA. Useful for feeding by hand a precollated part set.

Paper weight: from 20 up to 900 g/m2, paper, board and plastic material, also perforated and die cut. For different sheet sizes in width and height up to 5 mm set thickness in the same set.

Digital readout of speed.

6 digits continuous counter.

Infrared safety curtains on both sides (CE and TUV certified).

A control panel for the most important machine functions in each two stations unit, on the side opposite to the preloads.

Pressure/vacuum pump(s).

Batch counter at the delivery exit of the collator to stop the machine at the desired number of cycles. In this way it is easier in the separation of different jobs inside the same load of paper.

Electronic programming for max. 4 stations, to be determined in advance, which enables automatic feeding e.g. of a separating sheet and/or a top and/or bottom sheet (as cardboard) (optionals).

2 extra add-on stations for field retrofit. The extra stations can be added up to a maximum of 17.

Back to Top

It’s an industrial, automatic, suction "Collating System" with modular structure, based on a rotary system that guarantees high speed production and a minimum wear to moving parts.
The frame hardiness and the advanced tecnology make the MAXIMA a reliable instrument and suitable specially for high productions.

The suction feeders, equipped with indipendent telescopic suckers, which are adjustable in height and tilt, leave the sheets on the collecting tables.

The sheets are carried forward on support bars moving around the machine.
The frontal blowers and the separating springs assure a perfect pickup.

An electro-pneumatic control, situated in every station, stops the machine in case of a double or missing sheet.

In every station it’s possible to load up to 50 cm of material.

A motorized independently system adjust the pile height of each station in a gradual and automatic way.

Technical Data

From 3 up to 17 stations, can be elongated in units of two stations.

Speed: Maximum 3.600 mechanical cycles/hour
The actual production speed and the actual net output are dependent on size, paper quality, thickness, condition of stock and other operating conditions.

Standard version: Max. 605 x 805 mm (gripper edge); Min. 120 x 100 mm (gripper edge)

Two up version: Max. 600 x 380 mm (gripper edge); Min. 120 x 100 mm (gripper edge)

At the delivery of the two up collator, for coupling the two parallel collecting, is settled an overlapping unit, equipped with a set or sheet feeding station.

This unit is also useful as a automatic line switcher and conveyor.

Merging device at the delivery of the collator, positioned 90° across the collating direction; it merges together the two parallel sets. This device can also be used for manual or automatic feeding of single sheets or precollated part sets, as well as a transfer to downstream machines (delivery to the left side in running direction as option). Transport of the material by mean of pushers and continuos side jogging square.

Electromagnetic gates stop and jogger the sets on 4 sides before feeding the delivery exit (connection with other machines). Max. size mm 350 x 500, min. mm 100 x 150.

Extra charge for merging device to the left, instead of the right.

Double belts’ introduction for MERGING DEVICE to be fitted on it’s back for a straight in-line use together with the MAXIMA. Useful for feeding by hand a precollated part set.

Paper weight: from 20 up to 900 g/m2, paper, board and plastic material, also perforated and die cut. For different sheet sizes in width and height up to 5 mm set thickness in the same set.

Digital readout of speed.

6 digits continuous counter.

Infrared safety curtains on both sides (CE and TUV certified).

A control panel for the most important machine functions in each twostations unit, on the side opposite to the preloads.

Pressure/vacuum pump(s).

Batch counter at the delivery exit of the collator to stop the machine at the desired number of cycles. In this way it is easier the separation of different jobs inside the same load of paper.

Electronic programming for max. 4 stations, to be determined in advance, which enables automatic feeding e.g. of a separating sheet and/or a top and/or bottom sheet (as cardboard) (optionals).

2 extra add-on stations for field retrofit. The extra stations can be added up to a maximum of 17.

SPECIAL PRELOADING

Each station is equipped, underneath the preloading tables, with a returnrail.

This device makes easier the table taking and makes faster thefollowing loading operations.

Back to Top

GENERAL MACHINE DATA

It’s an industrial, automatic, suction "Collating System" with modular structure, based on a rotary system that guarantees high speed production and a minimum wear to moving parts.
The frame hardiness and the advanced tecnology make the Maxima a reliable instrument and suitable specially for high productions.

The suction feeders, equipped with indipendent telescopic suckers, which are adjustable in height and tilt, leave the sheets on the collecting tables.

The sheets are carried forward on support bars moving around the machine.
The frontal blowers and the separating springs assure a perfect pickup.

An electro-pneumatic co ntrol, situated in every station, stops the machine in case of a double or missing sheet.

In every station it’s possible to load up to 50 cm of material (pile height, excl. pallet).
Preloading table mounted externally to the machine, on pivoting wheels with side square for registering the paper pallet. Each preload equipped with double extractable trolley mounted on rails for an easy sliding of the paper pallet.

A motorized indipendently system adjust the pile height of each station in a gradual and automatic way.

TECHNICAL DATA

From 3 up to 10 stations, can be elongated in units of two stations.

Speed: Maximum 2.500 mechanical cycles/hour
The actual production speed and the actual net output are dependent on size, paper quality, thickness, condition of stock and other operating conditions.

SHEET SIZE:

Max. 1040x720 mm (gripper edge); Min. 350x500 mm (gripper edge)

Paper weight: from 20 up to 900 g/m2, paper, board and plastic material, also perforated and die cut. For different sheet sizes in width and height up to 5 mm set thickness in the same set.

Digital readout of speed.

6 digits continuous counter.

Infrared safety curtains on both sides (CE and TUV certified).

A control panel for the most important machine functions in each twostations unit, on the side opposite to the preloads.

Pressure/vacuum pump(s).

Batch counter at the delivery exit of the collator to stop the machine at the desired number of cycles. In this way it is easier the separation of different jobs inside the same load of paper.

High pile delivery exit for straight stacking.

Maximum height of complete pile: 1.200 mm. Maximum size mm 720 x 1.040, min. mm 350 x 500.

Back to Top